Chennai Jewellery Computer Aided Designing - Matrix Rhino Jewel CAD 3D 3Design Software Institutes Training Courses Tamil nadu , India

Jewellery Computer Aided Designing - Matrix Rhino Jewel CAD 3D 3Design

For further details contact


Aesera Jewellery Design Training Academy

No 144/74, Eskay Building, 3rd floor
Greams Road, Thousand lights
Chennai-600006 , Tamil nadu  India
 
Mobile: +91-9444100081, +91-9840689781

Email: seshu.gopal@jewelrydesignacademy.com

www.academyofdesign.in

 

 

 

Why Should We Study Computer Aided Designing -

1) To minimize errors in the interpretation of shapes and forms of an object drawn by Conventional 2-D drawings.

2) Your designs may be e-mailed to a third party in just minutes for review anywhere in the world with Internet capabilities.

3) Thought to reality takes tremendous jump into the future now. If you have an idea this morning, you could see a tangible useable model the next day with the Model Maker.

4) Your designs can be presented quickly to your department, or client for approval.

5) Several drawings of the same object viewed from different angles have to be made. This process is not only time consuming, but drawing conflicting diagrams of the object makes very often mistakes.

6) Many designing and manufacturing companies are increasingly using computer-aided design (CAD/CAM) programmes and tools to create and better visualization of the final product.

7) Computer models allow greater ease and flexibility in exploring a number of design alternatives, thus r


Why Should We study 2D & 3D

 Let me take this opportunity to explain the importance for designers to learn 2D and 3D jewellery designing:

If you are a designer and your client requires to see the design, first you will create the 2D of the jewellery not the 3d, the 2d drawing will be made in a specific view, if you are designing a ring, you will make the design, and the top view.

You can make more than one view, but it can’t be customized.

Suppose I want to see the ring up-side-down, looking at the amount of gold you have scooped, that would not be possible.

After the ring has been made in 2D then we make the 3d of that drawing, that 3D drawing will be made in such a way that it can be prototyped too.

You can make the ring in 3D and send it to your client, who can see the same drawing from any part of the globe, the way we wants, and rotate it, and check out minute details of the jewellery.

The trial version of JewelCad is freely available so, you can always send a copy of your 3D drawing to the client for him to check, there will be no software problem too!

Where as 2D can be exported to a jpeg if you need to send your files to your clients.

This is the significance of 2D + 3D.


What is the difference between computer aided designing and  manual designing?

Manual Designing, was the only form of jewellery designing until the introduction of Computer Aided designing (CAD).

With the introduction of Computer Aided Designing (CAD), jewellery which was drawn – designed on the paper (canvas) identical drawing could be made on the computer with much higher complexity and accuracy compared to manual designing.

Time:

Given a “X” period of time, a designer can make 5-10 designs on the computer compared to a design made manually.

If a designer makes 1 design using permutation and combination that one design on the computer can lead for 5-10 drawings which would not be possible if the jewellery is drawn manually.

Colour & drawing:

On the computer you are exposed to 13 million colours, you do not need to be good at drawing or an artist do draw on the computer as the tools available for drawing make it much simplier.

Clients:

If you design is made on the computer you can send your drawing to clients in any part of the globe via email.

That’s the best part it keeps you connected with your clients, from all parts of the globe.

Institute Chennai Diamond Gold 3D Rhino Jewel CAD Jewellery Designing Training School Academy Certificate Jobs Careers Courses Tamil nadu India

For Further Details Contact :


For Further Details Contact :

Aesera   Jewellery Design Training Academy

Chennai - 6 , Tamil Nadu ,  INDIA

Mobile : +919444100081, 9840689781

seshu.gopal@jewelrydesignacademy.com

www.academyofdesign.in

Rhino Jewel CAD 3D DESIGNING Software 

—  1^st to 3^rd :- Design concept, Technical of designs and Application of designing concepts

—  4^th to 5^th :- Creation 2d & 3d designs, How to use software tools?

—  6^th to 9^th :- Computer aided Designs [RHINO software]& presentation.

—  10^th to 11^th :- Portfolio designing.

—   12^th Project :-  and uploading for online business enquiry.

Certification:

Jewellery CAD Designer.

Support:

 1 year free hosting of student portfolio to Aesera jewel design academy website.

Days and timings:

Monday to Friday

10.30 am to 1 pm

Course material : CD

 Faculty and student ratio: 1:6

MANUAL JEWELLERY DESIGING

—  1^st  to 4^th  week :-Basic history of gold and diamond .

—  Sketching ,designing and pencil rendering concepts.

—  5^th to 6^th week :-  Source of design and understanding of 2d and 3d technique.

—  Different multiple of motifs,

—  7^th to 9^th week:- Marketing strategy and factory visit.

—  10^th to 11^th week :- Theme based concept.

—   12^th  week :-  project.

Certificate:

                     Manual jewellery designer

Support :  

             1 year free hosting of student design portfolio  on Aesera jewel design academy website.

Days and timings:

Monday to Friday

10.30 am to 1 pm.

Course material : PENCIL,PEN KIT & CD

Faculty and student ratio: 1:6

Diamonds Luxury Marketing Brands Chennai Gold Jewellery Designing courses School Academy Tamil nadu , India

For Further Details Contact 

 Aesera Academy of Jewellery Design 

                                Mobile :  +919444100081, 9840689781

                        
                                          seshu.gopal@jewelrydesignacademy.com

                                           www.academyofdesign.in

Diamond Trading:     

The diamond business has been redefined by branding and the fundamentals of advertising, public relations, and marketing - all of which are geared to the downstream retail and consumer jewelry markets with their unique customer segmentation features and demographics. Online access to the multiple brand environment of the diamond business including articles about Lev Leviev & Bulgari - May 2004, the Art of Marketing and Branding Diamonds, and The Case of the Missing Icon - De Beers LV.

Emerging Trends Downstream:
Emerging trends in the global diamond jewelry, fashion, and retailing sectors.

Antwerp World Diamond Center:
Approximately 1,500 diamond offices are located in Antwerp on Hoveniersstraat, Schupstraat, Rijfstraat, and Pelikanstraat.

Natural Diamonds:
The cumulative effect of branding can already be calculated and determined. The next challenge facing the diamond business, trade, and industry is promoting the importance of and supporting the integrity of natural diamonds (and their sources of rough). Private companies, individual diamond exchanges, the DTC, and the World Federation of Diamond Bourses have already started to address the issue.

Brands:
Branded diamonds and jewelry are the hottest topics in the diamond trade today; hearts and arrows, ideal cuts, round brilliants, squares, fancy shapes, fancy colors, modified rounds and fancies, the Regent, Queen of Hearts, Hearts on Fire, the Lazare Diamond, the Leo Diamond, Dream, Prince, Nakshatra, PrincessPlus, Royal Asscher, Lily Cut, Crisscut, cushion cuts, Rand, Cushette, Zales, Princessa, Flanders, Sirius, Tsarina, Lucida, Elara, Tycoon, Escada, Ashoka, Vera Wang, the Regent, the Queen of Hearts, the Eighternity, the Web Cut, and the Radiant Star to name but a few.

Mumbai India's Diamond Capital:
Hundreds of diamond offices are located in the general area of the Royal Opera House near the Roxy Cinema, Mumbai.

Surat  World's Major Diamond Cutting & Polishing Center:

Surat, is the major diamond manufacturing center. 8 out of 10 diamonds are cut & polished in Surat.

Sightholders: 

Branded diamonds and jewelry and other sightholder programs have the advantage of support from De Beers and the DTC including a new trademark, the forevermark program, the Diamond Promotion Service (DPS) worldwide, the Diamond Information Centers, J. W. Thompson, and many other added value features and services.

Jewelry Trade Shows:

The favorite venues for launching a new line of diamond set jewellery or a new branded diamond are the jewelry tradeshows worldwide, including the JCK, the JA New York, the Couture Show, Centurion, Diamonds by JCK, and shows in Las Vegas, Tucson, Mumbai, Tokyo, Bangkok, Basel, Hong Kong, and China.

Bourses:
Offices in diamond exchanges and cutting centers, worldwide including Hong Kong, Antwerp, Ramat Gan, New York, Tokyo, India (Mumbai and Surat), Israel, China, Canada, Russia, South Africa, Dubai, Shanghai, and Moscow trade in both rough and polished diamonds.

Israel Diamond Exchange: 

Approximately 1,200 diamond companies are located in the Shimshon, Maccabi, Noam, and the Diamond Tower buildings.

Diamonds  Luxury Marketing

Advertising has increased in luxury, business, travel, bridal, fashion, and jewelry magazines including Elle, Maxim, Oprah, Town & Country, Vogue, W, Robb Report, InStyle, and Vanity Fair to name but a few. The bridal market (and the media devoted to it) is considered to be an easy entrance course into the world of branding and brands, because the curriculum stays the same and the class changes on a regular basis.

Jewellery Manufacturing Process Part-2 Chennai Gold Diamond Institute Jewellery Designing Rhino Jewel 3D CAD Courses Tamil nadu , India

For Further Details Contact

Aesera Jewellery Designing Training Academy
 Greams Road, Thousand Lights
Chennai - 600006,  Tamil nadu  India
Mobile:  +919444100081, 9840689781

seshu.gopal@jewelrydesignacademy.com

www.academyofdesign.in

Jewellery Manufacturing Process Part-2 Chennai Diamond Institute Jewellery Designing Course

• Oxidizing: Antique jewellery is the oldest form of traditional ornaments. To give jewellery an antique look, it’s oxidized. This process is done by chemicals.
   
• Colouring the metal: When the ornamental piece or jewellery gets finish, to five it a more rich or new look its coloured. Liquid form of the metal Rhodium used to coloured jewellery. Rhodium is used on diamonds or stone’s prongs, grainy surface of sometimes all over the piece.
• Casting: Casting metal into a mould is done on a specially constructed machine, simple in principle and in operation by depending, nevertheless on the judgment and skill of its operator. Centrifugal force is relied upon to send the molten metal into every part of the intricate design and pattern of the model and also to eliminate gas bubbles and porous ness.
  
  Casting Platinum:
  No flux is needed when casting platinum as the metal is not subject to oxidization and stays clean at all stages of melting to the job of casting is primarily one of getting sufficient heat to make the metal flow freely. Platinum melts at around 1750’C but considerably more heat is needed to make it fluid enough to cast. It is difficult to define the colour of the metal ready for casting but perhaps the best description is ‘pearly white’. When viewed through the dark green goggles of the operator. When this colour has been reached, the arm of the machine is released and spins in an anti clock wise direction, forcing the metal into the mould.
  
  Casting Palladium: 
  Palladium casting is not quite so easily achieved. Although it melts at a slightly lower temperature it is more sluggish metal and more treacly when melted and requires the same casting temperature as platinum. Palladium is subject to oxidization and to overcome this flux is needed. The best time to add this to the melt is when the metal is just beginning to become molten. By carefully, manipulating the torch, the metal is washed around in the flux to help in achieving this cleanness, after which the flame is held quite steady in the centre of the melt until maximum heat is reached and the metal is ready for casting.
  
  Casting Gold:
  Casting gold into a mould is similar in principle to casting palladium but the heat required is not nearly so great. After the mould has been prepared and cooled down to the appropriate temperature. The remaining procedure will depend upon the quality. If gold to be cast, white gold needs greater heat than yellow gold and the higher the quality the greater the temperature required. This means that 18 Ct white needs to be hotter than 9 Ct before casting.
  
  Mold: mold is made by two processes:
• Hand-made: – by using this process, mold is made by worker at the same process used to make jewellery.
   
• Machine-made: by using CAM (Computer Aided Molding) techniques mold is done in machine. In this process first the design of ornament is made in 3D CAD (Computer Aided jewellery Designing), after than it’s applied for mold in molding machine. And the CAM machine is made the mold automatically.
   

Making the Wax-Model & Wax-Tree: From the mold which made by hand or CAM machine; wax model is made. The wax models, which are made by this technique, are than sticking in wax rod, which called Wax-Tree.

Lost wax Casting: Investment is the mixture of P.O.P. (Plaster of Paris) or other clay and water. A small amount of investment is coated over the wax-model by hand or brush and in machine it’s putting in large quantity surrounding the wax-tree placed in furnace. The furnace is then turn on. During this process of heating, the investment will bone dry and the wax will flow or burn out. This process called “Lost Wax”. For casting lost wax is the classic form.

Granulation: Granulation is the art of fastening gold or other metal’s granules onto another body of gold or other metal without the use of solder.

Electro forming: Electro forming is the art of building metallic pieces; by electro-deposition on a base or matrix, which is than removed in whole or in part, leaving a shell of electro deposited metal.

Jewellery Manufacturing Process Part-1 Chennai Gold Diamond Institutes Chennai jewellery designing institute courses Rhino Jewel CAD 3D Software Training Tamil nadu , India

 

 

For further details Contact

Aesera Jewellery Designing Training Academy
Email: seshu.gopal@jewelrydesignacademy.com
Contact:  +919444100081, 9840689781

www.academyofdesign.in

In this Session we will be knowing the various processes of Jewellery Manufacturing in detail , this will help any designer to understand his /her  visualisation of designs passes through various phases of  jewellery making

  The Jewellery                                                                                      
From the ancient era men or women wear different kinds of Jewellery. When they don’t know the word “Jewellery” or “Ornament” they decorate self body by leaves, beads, seeds, flowers, pebbles, bone etc. The singular purpose of Jewellery is to adorn the human form: to decorate the part of body. Necklace, Pendent, Earrings, Bangles, Bracelets, Rings, Studs, Armlets, Tika, Chains… thereis no limitation of the range of Jewellery. Men & women wear Jewellery in many parts of body; accordingto age, occasion & personality. This ornamental pieces or Jewellery are made from various metals according to demand. Mainly Gold, Silver & Platinum are used for Jewellery purpose; but, Copper, Bronze, Nickel, Brass, Wood, Bone, Teeth, Ivory, Clay, Lather are other materials used for Jewellery. Many different materials used for give smarten look to Jewellery are Diamonds, Precious or Semi-precious stones in different cutting & colour, Pearls, Enamel, Wood etc…

To make Jewellery is not simple, but by learning the processes by a right person or at right place you can make your own Jewellery, also at home. Jewellery making dose not require big space, in fact the work area can be rather compact and just allow enough room for a work-bench and some small tools of lower price.

    Benefits to learn jewellery making                               

• If you are in the business of Jewellery…
  You can get best work from workers, by using your knowledge. 
• If you are worker…
  You can give better finishing to your ornamental piece.
   
• If you are buyer of Jewellery…
  You can buy better work piece from show-rooms or Jewellery house.
   
• If you don’t have your own business of Jewellery…
  You can make your own Jewellery by your self.
   
• If you are housewife…
  You can make & adorn your own Jewellery.  

Basic processes to make Jewellery:                                                 

“Jewellery”, when thinking about, eyes are sparkling like diamond, and if the jewellery with diamonds don’t have imagination for the happiness to have it. But, if you know after many processes done on metal pieces, the jewellery is become. Mainly jewellery made by Manual (hand made) or Casting machine made). The processes done on jewellery are here.

Art of Jewellery Designing: Before learn to make Jewellery; you have to get the knowledge of Jewellery Designing. Jewellery Designing is the process where you imagine the Jewellery before making and make (place) it on the paper. Jewellery designing is necessary because, to make an ornament you have a reference to make it.

Forging: Forging utilizes the malleable quality of metal which allows it to be hammered into various shapes. One of the advantages of this is the spring tension created by the hardening of the metal.
Sawing: Sawing is a technique; that can be mastered quickly, enabling you to saw precisely along any line or cut out any shape from metal piece.

Filing: Metal pieces are shaped bi files, curves are cut, contours rounded, edges beveled and planes smoothed. Filing is also used after sawing to refine forms or to correct them where necessary.
Drilling the holes for the stones: To drilling the holes for the stones for appropriate size; always make the starting from the centre hole. A most important thing for drilling the stones is that the hole must be bigger in front side & must be smaller at the back side, because it gives support to the stone. The stones should be fall if the holes were made in the vertical sides. To put stone properly, the top hole should be made sufficiently large.

Drilling the holes for the diamonds: Before to drill the holes for diamonds; we can mark out the place where we drill. The process of drilling the holes for the diamonds is based on the size of the diamonds. The back of the holes should be neat but in simple pattern. The value of this process is costly but a little extra time spent on this process, it gives a good finishing.

Soldering: The method used to unit metal surfaces by heat and solder is called soldering. There are different types of solder used to solder jewellery. Lower purity metals, silver, copper or cadmium are mainly used. In diamond jewellery manufacturing the process of soldering is generally used soft soldering is quite different from silver soldering and gold soldering. In jewellery manufacturing, there is no place for soft soldering except it is used in minor parts of some jewellery. It is widely used in some kinds of repairing of jewellery.

Cleaning: Surfaces that are to be soldered together must be perfectly clean. All traces of grease, dirt or fingerprints must be removed in order for the solder to flow properly.

Mounting: The actual article which is made from the precious metal and suits the diamonds or gemstones in the article is called mounting of jewellery.

Enamelling: Enamelling is the technique; which is applied on ornamental pieces since many years ago. In ancient time, people from northern India, Egypt and Greek are used this method to make ornaments colourful. In enamel finely ground powered glass is fused on to a metal base. When heated, the powder of enamel will melt and fuse to the metal to produce richly coloured pieces of jewellery. Three types of Enamel used on jewellery. Enamel is available in transparent and non-transparent.

Buffing: Final finishing is the last step for jewellery making. But, before setting all the scratch marks, excess solder and surface blemishes are removed with fine files and emery cloth or in machine. This process is called Buffing.

Setting: In the finished product where the stone is actually brought in their appropriate place is called setting.

Polishing: To apply the final finish to the pieces is the last basic step in jewellery making.

Surface Treatment: Jewellery made by the basic processes given above, but to give it a smarten look the surface treatment is given. Many different techniques used to decorate the surface.

• Hammering: by using hammer, many different textures will made on jewellery surface.
   
• Engraving: this technique is used to cuts or incises lines into the surface of metal.
   
• Etching: this technique which produces a relief design to the surface of the metal by means of acid and an acid resist is easier to master than engraving, but certainly no less effective.
   
• Embossing: the process to emboss a different designs or textures on metal pieces.
   
• Sand Blasting: to make the metal surface grainy, l

Indian Jewellery History - 2 Chennai Diamond Gold Jewellery Designing Institutes Courses Training Rhino Jewel CAD 3D Software Tamil nadu , India

Indian Jewellery History - 2

For Further details contact 

Aesera Jewel Design Training
Academy

Mobile :  +919444100081, 9840689781

, seshu.gopal@jewelrydesignacademy.com

 

 

Indian Goldsmiths and Workmanship.

'Jadau' Jewelry                             

Also called as 'Jadtar' or Kundan Jewellery - is embedded with precious stones and reveals the traditional art of Rajasthan and Gujarat. Jadau creations are usually studded with multi-coloured precious and semi-precious stones and are reminiscent of the old Mughal tradition of Jadau jewellery craft.  The art of Kundan, combines enameling with uncut or rose cut diamonds and other precious stones encrusted on gold. Kundan Jadtar is a very special craft and not everybody's cup of tea. It requires exceptional skills, concentration and loads and loads of patience. And again, these skills and capabilities have to combine with hard work and aesthetic sense to create a master piece of art.

Whether it is Jadtar, Minakari or Kundan - each style of art imposes stringent process requirements and absolute concentration because of the intricacy involved. Owing to such painstaking efforts and time requirement to craft each piece, there are only a few master His who have this finesse and expertise. Each piece is a unique creation and with quality, purity and care going into its making - it can take several weeks to craft and finish, but one glimpse at the final product and most customers forget the agony of their wait.

Minakari or Enamelling Jewellery      http://www.jewelrydesignacademy.com

The one kind of traditional jewellery comes from North India. Minakari Jewellery is an exquisite combination of gems, enamel pigments and precious stones. This timeless craft goes back to the days of Shah Jahan - whose aesthetic vision transformed the process of lacquer enameling into a fine art. Minakari was the preferred style for the imperial thrones of those times. And even today, Minakari - with its unique carving style on Gold and Silver continues to dazzle women the world over with motifs of flowers, plants and scrolling vines. 

Hollow ornaments                   

The unbelievable art of gold work comes from Tamilnadu and Karnataka state mostly South India. These types of jewellery are looking like heavy weighted but actually light weighted ornaments.

Gold Jewellery with Filigree Work             http://www.academyofdesign.in

The great work of small plain and twisted wires, different small flowers & other shapes with gold grains comes from Gujarat.

Diamond Stone Studded Jewellery                                        

Most world-wide popular work of Diamonds & Gemstones. The master workers of this art are Bengali-workers, from West-Bengal, East India.

Thewa Jewellery                                                                           Thewa is the art of 18th  century inaugurated from Rajasthan, India. Thewa Jewellery is a different type of art work done by 23k gold and worked on glass. Unique glasses for Thewa Jewellery are treated by a special process to give a glittering effect, highlights the intricate gold work. The motifs used on Thewa jewellery are reflecting the culture, heritage and tales of romance and valor of State Rajasthan, India. Four gold sheets, each intended for a Thewa unit, are fixed to a lac-resin compound spread on a board. Following the design inscribed in line on the gold, an openwork pattern is pierced through the sheets using fine cutting chisels. The designs may be a hunting scene, a delicate climbing plant with equally delicate flowers and leaves, a gazing deer, a dancing peacock, a woman dressed up in typical Rajasthani attire, Krishna with gopikas and many other related to this theme.

Indian Jewellery History - 1 Chennai Diamond Gold Jewellery Designing Institute Rhino Jewel 3D CAD Software Training Courses Tamil nadu , India

Indian Jewellery History - 1

For Further details contact

Aesera jewel Design Training Academy

Mobile:  +919444100081, 9840689781
seshu.gopal@jewelrydesignacademy.com

• Jewellery History
• Jadau Jewelry or Kundan Jewellery
• Minakari or Enamelling Jewellery
• Hollow ornaments
• Gold Jewellery with Filigree work
• Diamond or Stone studded jewellery
• Thewa Jewellery

History                        

'Indian Jewellery' - two simple but heart touching words. When you think about, your minds races back in centuries. Eye capture ornamental history from passing billions of years will come in front of you. It is believed that Indian Jewellery craft is over billions of years old and over these years; it has evolved into an art - in terms of design and craftsmanship.

As Indian earliest history; when the country called Hindustan - before Chakravarti Maharaja Bharat (As per Indian history the first Emperor of the world, who become Emperor before more than 10000 billion years ago. And Chakravarti means the Emperor of the whole world.) the Indians well known with the art of Metal working, Stone cutting, Stone setting, Filigree work, Minakari (Enamelling), Kundan work, Embossing & other art of jewellery. Not only have this art of Metal working, but they well known with Jewellery Designing. By metal working and the art of jewellery designing they made many types of ornaments like Crowns, Rani-Haar (long necklace), Hansali or Hansdi (circular neck ornament), Necklaces, Pendants, Earrings, Tops, Thumb rings, Finger rings, Toe rings, Bangles, Bracelets, Kadas, Kadandias, Armlets, Armbands, Tikas, Borlas, Dots, Chains, Nose pins, Nose-rings, Nath chains (worn with nose ring), Ear chains, Waist-belts, Anklets… there is no limitation of the jewellery they made. Not only jewellery but many ornaments pieces, architectural constructions prove that the art of that time is not comparable with any other culture. Earliest Indian gives all this knowledge to the world.

India has always been a land of gems and a variety of precious stones. The test for colour in jewellery had its greatest manifestation in the lands of Hindustan and among the civilization of the Hindus. Large quantity of a wide variety of precious and valuable stones abounds in Hindustan (India). Sculptures and paintings of men and women adorn with jewels testify to their use, as does recent work which in quality and test points to the inheritance of a very ancient tradition. To the rich variety of stones was added the widespread use of pearls and of enamels and vitreous pastes, which were very popular in jewellery in India.

Adorning the hair, feet, ankles and every part of the woman's body, Jewellery occupies a prominent place in every woman's mind. And for the Indian woman - jewellery always was, still is, and will continue to be her innermost desire - a most intimate reflection of her grace and beauty.  

Many Indian historical places of that time have proved that India has the greatest art of metalworking, lapidary, jewellery designing, architecture and all types of work related to art. The art of the time is amazing and worldwide famous. 

In Harappa, one of the most ancient centers of the Hindu civilization, ornament was found are mostly made from red cornelian. In 4th & 5th Century AD the paintings of Ajanta show men & women wearing more jewels than clothes. In India the size & complexity of earrings, bracelets, armbands, belts, head dresses, leg bracelets and rings, which adorn these masterpieces of pictorial art, reflect the fantastic splendor.

                According with the changes in centuries, a vast variety of designs & different types has been emerged with a specific purpose. Today, women will not wear ten pieces of jewellery on her head. At other times they were less bulky but still richly adorned with clusters of pearls or colored stones some were half moon shaped and minutely decorated with bezels and pendants. Armlets & Bracelets could be made of light metalwork or tabular hoops or jeweled bands. This similar type of ornament was also worn on the foot. The number and variety of belts was comparative with necklaces. The Hindu women of Rajasthan were up to ten jeweled anklets one on top of the other, each with a specific denomination rings were often more on the toes.

Indian Jewellery is characterized by some of the finest handwork and symbolizes the painstaking efforts, the utmost care and the attention to detail in every piece that the workers create. The other facet of this jewellery is that it is custom-made and often created to match the original and individual persona of the woman.

In the world, jewellery known by culture or some religions; but in India every State in India has its own special style of crafting and these styles have been adapted by the Goldsmiths and Workers of that region.

RHINO GOLD JEWEL CAD 3DESIGN Services Outsourcing Chennai Gold Diamond Institute 3D Jewellery designing Software Training Courses Chennai Tamil nadu , India

Unique Designs Jewel CAD CAM Solutions



Mobile : +919444100081, 9840689781

Email: seshu.gopal@jewelrydesignacademy.com

Website: www.academyofdesign.in 

We will assist with your next custom design job and offer a variety of Design Services which are tailored to fit the needs of our clients. We offer an turn key solution of high quality service and the latest software and equipment along with years of experience and training and we will work with your existing designs, ideas, drawings, samples, and photos to create your own design.

Providing You with a host of comprehensive services including:

Design Consultation:

We will work with your existing designs, ideas, drawings, samples, and photos to create your own, either new or existing design.

Drafting and design assistance:

To help you create a unique line of jewelry in price points and styles to fit your store

Model Making Service:

Rapid Prototype(RPT), Wax Milling, and mold-making service

Note:
 All the above Jewelry Design Process Outsourcing services will be provided for CAD/CAM named Rhino, Rhino Gold ,Rhino Jewel, Gemvision Matrix, 3design cad,JewelCAD-  designing softwares uniquely made for jewelry designing. molding waxmilling, RPT with HR envision

Jewelry Branding:

Marketing, advertising, and promotional materials including packaging, displays, flyers, website and print digital art for your next promotion.


RHINO GOLD JEWEL CAD 3DESIGN Services Outsourcing Chennai Diamond Institute 3D Jewellery Software Courses Coimbattore

Chennai 3D CAD CAM Casting Diamond Gold Engagement Wedding Ring Retail Jewellery Design Business Consulting Services Rhino Jewel School Institute Academy Tamil nadu , India

For Further Details Contact :

  Aesera Jewellery  Design Training Academy

Mobile :  +919444100081, 9840689781

Email :     seshu.gopal@jewelrydesignacademy.com

www.academyofdesign.in


We will assist with your next custom design job and offer a variety of 3D CAD Jewelry Design Services which are tailored to fit the needs of our clients. We offer an turn key solution of high quality service and the latest software and equipment along with years of experience and training and we will work with your existing designs, ideas, drawings, samples, and photos to create your own design.

Providing You with a host of comprehensive services including:


Design Consultation:

We will work with your existing designs, ideas, drawings, samples, and photos to create your own, either new or existing design.

Drafting and design assistance:

To help you create a unique line of jewelry in price points and styles to fit your store with out best architects.

Model Making Service:

Rapid Prototype (RPT), Wax Milling, and mold-making service

Note: All the above services will be provided by software/hardware services for CAD/CAM named Rhino Jewel,  Gemvision Matrix, 3design cad, JewelCAD-  designing softwares uniquely made for jewelry designing.
Molding waxmilling, RPT with HR envision technologies

Description of the complete jewelry design process using cad and RP technology

We work directly with manufacturers for Jewelry Design Manufacturing  Outsourcing.  We can take your Manual Jewelry sketch, picture or idea to a virtual 3-D design and output the design into a castable wax model.  We can then oversee the complete process of casting the master model, pre-finishing, mold making, quantity casing, finishing, gemstone supply and finished product delivery.

This process can seem very complicated at first so here is a short overview of the complete cad jewelry design process:

Submit picture or sketch.

    As long as your picture or sketch conveys the general design we can take it from there. Your sketch can be simple but should include basic millimeter measurements
    Top and side views preferred if available.

Give a description and measurements of the jewelry sketch.

    Your description should include ring size, stone shapes and sizes, shank style, width and height were applicable.
    Describe other features of the design as desired with measurements in mm.( US / Europe / Indian )

Receive CAD rendering , Images via email.

    You will receive an email or call follow up for further information if required. If not you will receive a quote.
    Once approved you will then receive a cad rendering via email to review. At this time any changes can be made.

Reply with modifications or approval.

    If changes are need we will re-email new renderings.
    Email or fax final approval of design.

Onsite rapid prototyping model printing.

    Our RP  machine will then build your design into a stunning 3D model ready for direct casting.
    Cast, set and polish.

------------------------------------------------------------------------------------------------------------

Advanced Diamond Gold Jewellery Designing Rhino 3d Jewel CAD Courses Technical Training Chennai Institute School Chennai Tamil nadu , India

For Further Details Contact:

Aesera  Jewellery Design Training Academy

Phone : +919444100081, 9840689781

Email: seshu.gopal@jewelrydesignacademy.com

 www.academyofdesign.in

Jewellery design is an art of beautifying personal adornment, manifesting itself as brooches, rings, necklaces, earrings, bracelets etc. It is a relatively creative and rewarding passion. The technique used to craft them is virtually endless.

The knowledge of creating and communicating a design idea through various presentations is imparted in the module, this will help to bridge the gap between the needs of the consumer and the manufacturer by using commercially viable and creative designs.

Career Opportunities:

Jewellery Designer

Jewellery Manufacturing Units

Self Employment

Teaching and Research

Independent Shops / Private Studios

Fairs and Flea Markets

Course Contents

Design Fundamentals

Visualization & Freehand Object Drawing

Geometry of Design

Colour Theory

Techniques & Material Study

Visual Exploration of Forms and Textures

Thesis of Adornments

Knowledge of Stone Cutting

Directory of Shapes & Forms

Rendering of Stones and Metals

Project I: Designing Jewellery Products for Commercial Domestic Market

Project II: Designing a range of Jewellery Products with unique style and concept.

Portfolio

Duration

Normal Track 6 Months

2 hrs class every day (Monday to Saturday)